Hi to all Auto-Polar community
This is our last update for FIS+ and FIS+ Advanced customers :

-=-=-=-=-=-=-=-=-=-=-=-=-=-
  Firmware Update v0.2.0
-=-=-=-=-=-=-=-=-=-=-=-=-=-

For PF02 users (normal) :

[+] Fixed problem with memory corrupted (configuration)
[+] Fixed little issue in name change (requested by user)
[+] Improved stability of the product

For PF03 users (advanced) :

[+] Fixed problem with memory corrupted (configuration)
[+] Fixed little issue in name change (requested by user)
[+] Improved stability of the product
[+] Fixed problem with flashing lights
[+] Fixed problem with confort intermitent
[+] Fixed issue with oil temp, now if not available appears N/A
[+] Fixed flowmeter problem with data >999
[+] Improved diag routines
[+] Fixed problem for enable/disable closing with rain
[+] Added two new parameters :
         - Injection_Timing
         - Injection_Quantity
 
Any enquire, sugerence or question, please not doubt in contact with our staff at www.auto-polar.com/forum


Thanks in advance for all your attention,
with best regards,

[ AutoPolar Team ]
Http://www.auto-polar.com

Hi to all Auto-Polar community
This is our last update for FIS+ customers

-=-=-=-=-=-=-=-=-=-=-=-=-=-
  Firmware FIS+ v0.1.9
-=-=-=-=-=-=-=-=-=-=-=-=-=-

[+] Improved diagnostics functions :

Detected problem when we try to codify units with vehicle in movement, ECUs not allow acces via diagnostic on
movement, so we restrict access in this case.
Improved menu navigation when you enter to see any value, now not exists delay time after not configure any value 

[+] Improved mirror functions :

Added new screen when you configure position of mirrors (help screen)
Modified totally routines of movement for restrict movement in case that mirrors not be in correct position (blend)
Improved OFFSET function, for make a more precise configuration. Values from -9 to 9  (0 is normal value)

[+] Other fixments and improvements :

Improved communication that solves problem with screen (after power on vehicle not appears)
Modified the screen of the parameters selection, now only will appear parameters supported by your vehicle
Other minor bugs and fixments (internal)

Any enquire, sugerence or question, please not doubt in contact with our staff at www.auto-polar.com/forum
 
 
Thanks in advance for all your attention,
with best regards,

[ AutoPolar Team ]
Http://www.auto-polar.com

 
 
Hi to all Auto-Polar community
This is our last update for FIS+ customers
 
-=-=-=-=-=-=-=-=-=-=-=-=-=-
Firmware FIS+ v0.1.8
-=-=-=-=-=-=-=-=-=-=-=-=-=-
 
[+] Improved torque reading
[+] Improved power reading
[+] Improved flowmeter reading
[+] Improved boost pressure reading, now negative values are showed
[+] Improved communications between processors, now is more stable and quicker
[+] Improved stability of diagnostics communications
[+] Improved daytime running lights using fog beams
[+] Improved mirror lowering function
[+] Added an offset function for fine adjustement of the mirror lowering function
[+] Other internal fixments

VERY IMPORTANT
 
Due to a new organization of the user´s memory, to apply this update, the box must be totally disconnected
from the vehicle first, sorry for the inconvenience

Any enquire, sugerence or question, please not doubt in contact with our staff at www.auto-polar.com/forum
 
Video of v0.1.8 working :  http://www.youtube.com/watch?v=2TWK3IwaVyA 

Thanks in advance for all your attention,
with best regards,

[ AutoPolar Team ]
Http://www.auto-polar.com