Autopolar on Facebook Autopolar on Twitter Autopolar RSS Feed

FIS+ Update v0.2.3 [16-02-12]

 •  Posted by Auto PolarTeam on Feb 16 2012  • 




Hi to all Auto-Polar community
This is our last update for FIS+ and FIS+ Advanced customers :


 Polar FIS+ -  Firmware Update v0.2.3                                                    
 
[+] Improved routines for get data from the vehicle via diagnosis bus

[+] Added support for gateways older than "K" letter and RNS510 with actual firmwares
       - With this new version v023, is not necesary now change gateway anymore.
       - PolarFIS function make totally compatible and stabilize all can communication 
       - This prevent buy other boxes (products) for make same function and fix this problem

[+] Improved compatibility with "NO OEM" Radios

[+] Added support for more Motor ECUs
       - 03C-906-027-BS
       - 03C-906-027-CD
       - 03C-906-027-CN
       - 03C-906-027-CQ
       - 03C-906-027-CT

[+] Added new language : Danish   (thanks goes to Marc Sorensen, for translation)
[+] Added new language : Romanian
[+] Added new menu for select language manually : 
       - Visualization -> Screen -> Language

[+] Added new parameter (PF03 only):  MISSFIRES
       - This parameter store all fails in your vehicle´s engine at start
       - Very important for reprogrammed vehicles

[+] Added new parameter (PF03 only):  AIRFLOW EGR VALVE (diesel motor)
       - EGR : Exhaust Gas Recirculation
       - This valve helps your car to burn fuel more efficiently and decreases noxious emissions.


For install this update, please use ActiveX from our official web www.AUTO-POLAR.com (Section Update Zone)
Any enquire, sugerence or question, please not doubt in contact with our staff at www.auto-polar.com/forum

Thanks in advance for all your attention,
with best regards,






FIS+ Update v0.2.2 [23-01-12]

 •  Posted by Auto PolarTeam on Jan 23 2012  • 




Hi to all Auto-Polar community
This is our last update for FIS+ and FIS+ Advanced customers :

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Firmware Update v0.2.2 (stable version)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

For Polar FIS+ users [PF02]

- Fixed problem with battery drain
- Fixed problem of stability with some vehicles (user report)
- Fixed problem with day lights (now allow to modify intensity)
- Added new parameter : Presión bomba de combustible

For Polar FIS+ Advanced users [PF03]

- Fixed problem with battery drain
- Fixed problem of stability with some vehicles (user report)
- Fixed problem with day lights (now allow to modify intensity)
- Added new parameters :
- Fuel pump pressure
- Injection Angle (usefull for reprogramed vehicles)
- Injection Start (usefull for reprogramed vehicles)
 
For install this update, please use ActiveX from our official web www.AUTO-POLAR.com (Section Update Zone)
Any enquire, sugerence or question, please not doubt in contact with our staff at www.auto-polar.com/forum
 
Thanks in advance for all your attention,
with best regards,

[ AutoPolar Team ]
Http://www.auto-polar.com

FIS+ Update v0.2.1 [12-01-12]

 •  Posted by Auto PolarTeam on Jan 12 2012  • 




Hi to all Auto-Polar community
This is our last update for FIS+ and FIS+ Advanced customers :

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
  Firmware Update v0.2.1 (final version)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

FEATURES
-----------------------------------------

- Solved battery drain problem.
- Solved a problem that didn't identify the Confort ECU.
- Solved all coding funtions of Confort ECU, such as Rain closing, 20 Kmh closing and one touch closing.
- Improved all coding functions.
- Solved problem with accelerator pedal that makes crash the Polar FIS menu.
- Solved problem with Intake temp that shows negative value.
- Improved communication between box processors.
- Improved communication functions to parameters from the diagnostics bus.
- Improved Polar FIS menu stability.
- Add OPS Parktronic emulation (BETA).
- Added a new option for mirror lowering for cars that this function doesn't work before (BETA)
- Added a new option for modified engines with more power than stock. Enter the Polar FIS configuration menu and navigate to SCREEN->VISUALIZATION->ADVANCED-> TORQUE ADJUST. In Stock torque introduce the stock torque of your car and in New torque, introduce the car torque that the car have now. That will calculate a conversion factor to show the torque and power of your car after the modification.
- Improved German Language texts.
- Improved Parktronic emulation.
- Solved problem with coding of rain and light sensors that makes that was impossible to reach 255, that is the maximiun value.
- Solved problem that makes to register a error in the gateway (sporadic telematics communication error).gateway.
- Improved Parktronic emulation.
- Revised german texts.
- Added a new option to configure desktop for 4 parameters. Go to the Polar FIS configuration menu SCREEN->VISUALIZATION->SCREEN x->PARAMETER QTY. and select 4, 5 or 6.
- Still in TO-DO list some texts and other functions (for add in next updates)
- Updated german language texts.
- Solved problem with switch off Polar FIS function, now it works.


IMPORTANT
-----------------------------------------

The Parktronic OPS emulation option is designed for cars that have equipped RNS-510 and can not see in it the Parktronic sensors. If you already see the sensors on RNS-510 display, please avoid to activate the emulation.
The Parktronic OPS emulation need to activate the module 10 in the CAN Gateway, that is only available on gateways after F model (F included), if you try to activate that function with a older gateway a error message will be displayed indicating that this function is not avilable.
To activate the Parktronic OPS emulation, access to the Polar FIS configuration menu, and navigate to CONFORT->PARKTRONIC, there, you can activate it.

In Skoda vehicles, there is no problem because parktronic module send messages to the sensors, but in the other brands this messages arent sent and for the moment this disable Parktronic OPS emulation. So this means this feature only will be available in Skoda vehicles.

A new function called Alt. mode is added inside the mirror configuration screen (CONFIGURATION MENU->CONFORT->MIRRORS). This function is only for users that the mirror lowering doesn't work in older versions. If mirrors works with older versions, it's not recommended to activate it.
In vehicles that doesn't work before, activate Alt. Mode, and after that, configure mirror positions, finally select the mode and test if it works now.

Please, take note that Parktronic OPS emulation firmware as weel as the new mode for mirror lowering is actually under development, they're tested and works without problem, but we are still working on that, so if you find any problem, please post it here to solve it.


HOW TO INSTALL
-----------------------------------------

For install this update, please use ActiveX from our official web www.AUTO-POLAR.com (Section Update Zone)


Any enquire, sugerence or question, please not doubt in contact with our staff at www.auto-polar.com/forum


Thanks in advance for all your attention,
with best regards,

[ AutoPolar Team ]
Http://www.auto-polar.com

Total 12 records. Page 1 of 4   [1] [2] [3] [4]